English
Detachable Remote Control Setting LED Driver Sensor
Brand:
HAISENItem NO.:
HT36VOrder(MOQ):
100pcsPayment:
L/C, T/T, Western UnionProduct Origin:
ChinaCertification:
CE,ROHS,TUV,REDDetachable Remote Control Setting LED Driver Sensor
Features:
Specification
| Output | Output LED current | Max. 0.75A |
| Output LED voltage | 30-48VDC | |
| Output LED power | 36W | |
| Input | Input voltage | 120~240VAC 50/60Hz |
| Input current | 0.34-0.18A Max | |
| Input power | Max. 40W | |
| Microwave frequency | 5.8GHz±75MHz | |
| Microwave power | <0.3mW | |
| Sensor Parameters | Hold time | 5s/30s/1min/3mib/5min/10min/20min/30min |
| Daylight threshold | 2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable | |
| Stand-by period | 0s/10s/30s/1min/5min/10min/30min/+∞ | |
| Stand-by dimming level | 10%/20%/30%/50% | |
| Detection angle | -20°C~50°C Tc: 80°C | |
| Mounting height | Max.6m/19.68ft | |
| Detection range | Max.ø14m/45.92ft | |
| Empty load voltage | ≤63V DC | |
| Power factor | ≥0.9 | |
| Efficiency | 87% (Max.) | |
| Detection area | 25%/50%/75%/100% | |
| Others | IP rating | IP20 |
| Life time | 50,000 hours | |
| Warranty | 3 years | |
| Installation | Installed inside lamps | |
| Package requirement | Bubble pack, paper flat, outer carton | |
| Operating temperature | Ta:- 20°C~50°C Tc: 85°C | |
| Abnormal protection | SCP:Auto recovery,OVP,OCP,OTP | |
| EMC standard | EN55015 | |
| Safety standard | EN61347-1 EN61347-2-13 EN60598-1 |
Wiring diagram
Mechanical structure(mm)
Detection coverage
Demo
Application
Previous:
57W LED Driver Microwave Movement Sensor with Remote ControlNext:
Dimmable Sensor LED Driver Remote Contol Microwave Movement SenorIf you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
Categories
New Products
Motion Sensor Dimmer Switch 5.8G Frequency Sensor Output LED Power 9-18W
Linear Detachable Design Remote Control Setting 3 Years Warranty Dimmable Sensor
Round Design Plane Antenna For Ceiling Light Dusk Dimmable Motion Sensor
40W Power Isolated LED Driver with 0.4A Current For Batten Light HT40V-I is Isolated 40W LED Driver & Microwave Motion Sensor Combined 2-in-1 products with 30-54V Output Voltage, Daylight Priority and Detection Range & Height of 6m(H) x 14m(D), Dimming Function with Constant Output LED Current Suitable for Batten Light & Tri-proof Light
Slim Design Microwave LED Driver Sensor Combined 12 - 25W 0.23A Current Linear Light
HT19V 2 is a LED Driver&Microwave Sensor 2-in-1 Products with 30-54V Output Voltage Detection Range & Height of 6m(H) x 14m(D), Dimming Function Microwave Motion Detector with 12-19W Output Power Suitable for Ceiling Light
HT19V-I is a Flicker-Free 220-240VAC 18W LED Driver&Microwave Sensor 2-in-1 Isolated Solution with 24-52V Output Voltage and 6m(H) x 14m(D) Mounting Height and Detection Range
Constant Currant Output Daylight Detection Microwave Movement Sensor
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
© Copyright: 2025 Microtionlight All Rights Reserved.
IPv6 network supported
