English
16W 2 in 1 Power Supply Driver with motion sensor for led Ceiling Light
Brand:
HAISENItem NO.:
HT16VOrder(MOQ):
100PCSPayment:
L/C, T/T, Western UnionProduct Origin:
ChinaCertification:
CE,ROHS,TUV,RED16W 2 in 1 Power Supply Driver with motion sensor for led Ceiling Light
Features:
Detailed product information:
| Input voltage | 120~240VAC 50/60Hz |
| Input current | 0.3A Max |
| Input power | 16W |
| Detection area | 50%/100% |
| Hold time | 5s/90s/ 5min/10min |
| Daylight threshold | 2Lux /10Lux /50Lux/Disable |
| Stand-by period | 0s/10s/10min /+∞ |
| Stand-by dimming level | 10%/30% |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Detection angle | 30°~150° |
| Mounting height | Max.6m(ceiling mounted);Max.3m(wall mounted) |
| Detection range | Max.ø14m(ceiling mounted);Max.10m(wall mounted) |
| Output LED current | 0.3A/0.35A |
| Output LED voltage | 24V~52V |
| Output LED power | 7W~16W |
| Empty load voltage | ≤63V |
| Power factor | ≥0.9 |
| Efficiency | 87% (Max.) |
| Operating temperature | -20°C~50°C Tc: 80°C |
| Abnormal protection | SCP:Auto recovery,OVP,OCP,OTP |
| EMC standard | EN55015 |
| Safety standard | EN61347-1 EN61347-2-13 EN60598-1 |
| IP rating | IP20 |
Size information(based on mm)
DIP Switches
No. 1 - Detection area
No. 2 and 3- Holdtime
No. 4 and 5 - Daylight Threshold
No.6 and 7. - Standby period
No.8 - Standby diming level
Current Selection: Plug-in Pin
Working Cycle:
The light will turn on when people walk into the detection range; after people leave, the light will keep for some time, as we called "Holdtime"; After "Holdtime", the light will give low output and keep for a while, as called "standby dimming" and "Standby Period"; After Standby period, the light will turn off.
Application:
Suitable for ceiling light, good for indoor residential lighting and commercial lighting, for example the intelligent office.
We are committed to providing high quality and more innovative microwave sensors and intelligent control products.
If you might be interested in this or any other related products, please feel free to contact us.
Previous:
Dimmable Sensor LED Driver Remote Contol Microwave Movement SenorNext:
CE TUV RED Approved LED Driver Sensor High Power For Ceiling LightIf you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
Categories
New Products
Motion Sensor Dimmer Switch 5.8G Frequency Sensor Output LED Power 9-18W
Linear Detachable Design Remote Control Setting 3 Years Warranty Dimmable Sensor
Round Design Plane Antenna For Ceiling Light Dusk Dimmable Motion Sensor
40W Power Isolated LED Driver with 0.4A Current For Batten Light HT40V-I is Isolated 40W LED Driver & Microwave Motion Sensor Combined 2-in-1 products with 30-54V Output Voltage, Daylight Priority and Detection Range & Height of 6m(H) x 14m(D), Dimming Function with Constant Output LED Current Suitable for Batten Light & Tri-proof Light
Slim Design Microwave LED Driver Sensor Combined 12 - 25W 0.23A Current Linear Light
HT19V 2 is a LED Driver&Microwave Sensor 2-in-1 Products with 30-54V Output Voltage Detection Range & Height of 6m(H) x 14m(D), Dimming Function Microwave Motion Detector with 12-19W Output Power Suitable for Ceiling Light
HT19V-I is a Flicker-Free 220-240VAC 18W LED Driver&Microwave Sensor 2-in-1 Isolated Solution with 24-52V Output Voltage and 6m(H) x 14m(D) Mounting Height and Detection Range
Constant Currant Output Daylight Detection Microwave Movement Sensor
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
© Copyright: 2025 Microtionlight All Rights Reserved.
IPv6 network supported
